Ballast Controller + 2MOSFET - FAN7710.ppt

Ballast Controller + 2MOSFET - FAN7710 主要技术指标 美国飞兆半导体指定代理 香港汇贤电子有限公司（珠海办事处） 刘金辉（销售经理） 珠海市南屏科技园屏东五路六号B栋四楼 电话：0756-3899018 传真：0756-3898388 E-mail139.com * Development Schedule FAN7710 is an electronic ballast control IC which can drive CFL lamp directly. Features - Highly Integrated Power System-On a Package - On-chip Oscillator, No external Capacitor required - Active Dead-time Control for low EMI application - Open Lamp Detection without Sensing Circuitry - Longer Lamp Lift-time with Pre-heating control - 8DIP package Applications Electric CFL Ballast Technical Analysis Key Application Electric CFL Ballast Competitors IR2520D, UBA2024 Package 8SOP/DIP BLOCK DIAGRAM Description Code D FAN7710 Configuration High-Side Gate Driver +dv/dt noise cancelleration circuit +UVLO +Shoot-through prevented output buffer Running frequency control using a resistor Preheating/Ignition time control And Dead-time control loop stabilizer Using a capacitor Adaptive ZVS controller And Open Lamp Detection Without any external devices 550V power MOSFETs (drive up to 20W lamp) Ballast Controller + 2MOSFET - FAN7710 Code D Application Circuit FAN7710 FAN7710 ER sample test results (Con’t) Test Evaluation Board FAN7710 ER sample test results (Con’t) High Temperature Test (Chamber Temp.=120OC) 220V AC Power 20W CFL (Compact Fluorescent Lamp) PCB FAN7710 ER Sample (8DIP) Socket Chamber Temperature Recorder X O X X X Internal H/B Switchs Over 120W Up to 20W Over 120W Over 120W Over 120W Lamp Power 8SOP/DIP 350/650mA -25°C ~ +125°C 91.8uA X 50KHz (+-4%) X Rt Var. X Automatic O O O FAN7711 8DIP 800mA (Isat.(Switch)) -25°C ~ +125°C 91.8uA X 50KHz (+-4%) X Rt Var. X Automatic O O O FAN7710 -25°C ~ +125°C -25°C ~ +125°C -40°C ~ +125°C Operating Temperature 500/500mA 250/450mA 250/500mA Output Current (Sink/Source) 14SOP/DIP 16SOP/DIP 16SOP Package O O O Protection (OLP, OVP) O O O Programmable Run Frequency O O O Programmable Preheat Frequency X O X Internal Boo