50大车运行机构及主梁设计.docVIP

攀枝花学院本科毕业设计（论文） 50/10t双梁桥式起重机 学生姓名： 谭恒 学生学号： 200410627122 院 （系）： 机电工程学院 年级专业： 04级机制三班 指导教师： 吴国洋 副教授 二〇〇八年六月  摘 要 起重机提高了人们的劳动效率，搬动大型物件。在厂房内搬运大型零件或重型装置桥式起重机是不可的。 随着现代科学技术的迅速发展，工业生产规模的扩大和自动化程度的提高，起重机在现代化生产过程中应用越来越广，作用愈来愈大，对起重机的要求也越来越高。尤其是计算机技术的广泛应用，许多跨学科的先进设计方法出现，促使起重机的技术进入崭新的发展阶段结合生产实际提出了起重机大车运行机构以及主梁的几种方案，通过分析方案对大车运行机构及主梁进行了设计，对起重机的安全检查提出了要求桥式起重机 ABSTRACT the hoist cranes appearance raised peoples labor efficiency greatly, before need many people the large-scale thing which spends the long time to be able to move can achieve the effect easily now with the hoist crane, particularly in the small scope moves in the process hoist cranes function is quite obvious. Transports the large-scale components or the heavy installment bridge-type hoist crane in the factory workshop may not attain lacks. along with the modern science technologys rapidly expand, the industrial production scales expansion and automaticitys enhancement, the hoist crane applies in the modernization production process is getting more and more broad, the function is getting bigger and bigger, is also getting higher and higher to hoist cranes request. Especially computer technologys widespread application, many interdisciplines advanced design methods appear, these urge hoist cranes technology to enter the brand-new development phase. the in coor with progress of production proposed actually the hoist crane large cart movement organization as well as king posts several kind of plans, have carried on the design notes through the analysis designation plan and to the large cart movement organization and the king post, simultaneously, also set the request to hoist cranes security check. Keywords: Double beam bridge type hoist crane; Large cart movement organization; King post; Designs  目 录 摘 要 I ABSTRACT II 1 绪 论 1 2 大车运行机构方案拟订以及选择 4 2.1大车运行机构的几种常用方案 4 2.1.1低速集中驱动 4 2.1.2中速集中驱动 5 2.1.3高速集中驱动 5 2.1.4分别驱动 6 2.2大车运行机构方案分析 6 2.2.1低速集中驱动 7 2.2.2中速集中驱动 7 2.2.3高速集中驱动 7 2.