刀具刃磨中心z轴进给系统设计与建模-毕业设计.docVIP

毕业设计说明书 题 目 刀具刃磨中心Z轴进给系统设计与建模 刀具刃磨中心Z轴进给系统设计与建模 [摘要]本文主要阐述了刀具刃磨中心工具磨床Z轴进给系统设计与建模，数控磨床是利用磨具对工件表面进行磨削加工的机床，是高效高精度的刀具刃磨机床，特别是五轴联动的数控工具磨床，是刀具刃磨机床发展的方向。可以用来加车刀，麻花钻，工立铣刀，球头铣刀，阶梯钻，铰刀，成形铣刀，深孔钻，三角凿刀和牛头刨刀具等。进给系统采用全封闭结构，无外挂装置，内置切削液冷却循环装置及油雾回收装置。进给轴由单元电机通过高精度无间隙联轴器与精密滚珠丝杠副直联，无间隙误差。且运动平稳，传动精度高，不易磨损，使用寿命长。导轨全部采用燕尾型精密滚珠直线导轨，具有精密高，摩擦系数小，寿命长等特点。导轨、滚珠丝杠副采用具有冷却装置的全自动定时定量润滑系统。并在PROE中画出Z轴进给系统三维模型图，生成二维工程图。 [关键词] 刃磨中心 Z轴进给系统 闭环系统 滚珠丝杠 直线型滚动导轨 With grinding center Z axis feed system design and modeling Jiang PengFei (Grade08,Class1,Major Mechanical design and manufacture of extremely automation ，Mechanical Engineering College Dept，Shaanxi Univsity of Technology，Hanzhong 723003，haanxi ) Tutor： Abstract：This paper mainly expounds With grinding center Tool grinding machine Z axis feed system design and modeling Nc grinder is use abrasive to the surface grinding of machine tools The high precision cutting tools is efficient machine tools, especially for five axis of joint nc tool grinding machine, cutting machine tool is the direction of development. Can be used to add lathe tools, manual twist drill, the workers end mill, the ball milling cutter head, ladder drill, reamer, forming cutter, deep hole drilling, triangle chisel and shape tools, etc. Feeding system adopts fully closed structure, no hacking device, built-in liquid cooling cycle device and cutting oil mist recycling equipment. The motor shaft by unit by high precision no clearance coupling and precision the ball screw vice straight league, no clearance error. The smooth movement and high driving accuracy, not easy wear and long service life. Guide all adopt the coattails type precision ball linear guide, with high precision, small friction coefficient, life is long, etc. Guide, the ball screw vice using a cooling device of automatic timing quantitative lubrication system. And in PROE draw in the Z axis into 3 d model picture to the system, and to generate two-dimensional engineering graphics. Key words： Gang center