抽油井含水率计算方法探讨.pdfVIP

ICRSM 00286 抽油井含水率计算方法探讨 虞 桐 中石油大庆油田有限责任公司测试技术服务分公司第二大队 Discussion on calculation method of pumping water content Yu Tong Service Daqing Oil Field Co Test Technology Branch Company Second Battalion Copyright 2014 Shaanxi Petroleum Society This paper was prepared for presentation at the 2014 Co-Meetings on Field Surveillance and Management held in Beijing, China, 11-12 August 2014. This paper was selected for presentation by the ICRSM Committee following review of information contained in an abstract submitted by the author(s). Contents of the paper, as presented, have not been reviewed by the ICRSM Committee and are subject to correction by the author(s). The material does not necessarily reflect any position of the ICRSM Committee, its members. Papers presented at the Conference are subject to publication review by Professional Committee of Petroleum Engineering of Shaanxi Petroleum Society. Electronic reproduction, distribution, or storage of any part of this paper for commercial purposes without the written consent of Shaanxi Petroleum Society is prohibited. Permission to reproduce in print is restricted to an abstract of not more than 300 words; illustrations may not be copied. The abstract must contain conspicuous acknowledgment of ICRSM. Contact email:info@hxan,com. Abstract The article on the Differences in the pumping oil gas oil ratio, By the oil column density or dissolved gas oil level to the pump export ratio，The theoretical calculation method of the corresponding water content ，Put forward the necessity of level depth monitoring. Based on the calculation of water value of some pumping wells, Water cut measurement value and testing the water content error comparative analysis, Elaborated with high gas oil ratio and water