a plasma-based non-intrusive point source for acoustic beamforming applications论文.pdfVIP

Journal of Sound and Vibration 344 (2015) 59 –80 Contents lists available at ScienceDirect Journal of Sound and Vibration journal homepage: /locate/jsvi A plasma-based non-intrusive point source for acoustic beamforming applications Christopher J. Bahr a,n, Nikolas S. Zawodny a, Brandon Bertolucci b, Jian Li c, Mark Sheplak d, Louis N. Cattafesta e a Aeroacoustics Branch, NASA Langley Research Center, Hampton, VA, USA b Boeing ANP Laboratories, Boeing Aircraft Company, Seattle, WA, USA c Department of Electrical and Computer Engineering, University of Florida, Gainesville, FL, USA d Department of Mechanical and Aerospace Engineering, University of Florida, Gainesville, FL, USA e Department of Mechanical Engineering, Florida State University, Tallahassee, FL, USA a r t i c l e i n f o a b s t r a c t Article history: A laser-generated plasma acoustic point source is used to directly measure the point Received 21 October 2014 spread function (PSF) of a microphone phased array. In beamforming analysis of Received in revised form microphone phased array data, the true acoustic field is convolved with the arrays PSF. 17 January 2015 By directly measuring the PSF, corrections to the array analysis can be computed and Accepted 19 January 2015 applied. The acoustic source is measured in an open-jet aeroacoustic facility to evaluate Handling Editor: Y. Auregan Available online 10 February 2015 the effects of sampling rate, microphone installation, source shift, reflecti