基于EDA层次化设计方法的出租车计费器设计.pdfVIP

2011 8 15 Aug. 2011 34 16 Modern Electronics T echnique Vol. 34 No. 16 基于EDA 层次化设计方法的出租车计费器设计 孟 中 ( , 2100 6) : 出租车计费器一般采用以单片机为核心的设计方法, 设计不够灵活方便为此, 在此介 了采用 EDA 技术的 层次化设计方法设计出租车计费器的方法即用VH DL 编写各 个功能模块, 实现低层设计; 用原理图输入方式描述各模块 间的关系, 实现顶层设计采用 FPGA 可编程逻辑器件为系统控制单元, 无需添加外围电路, 更新功能仅需修改软件实验 表明, 该设计方法简单快捷, 所设计的系统性能可靠应用该方法设计的数字电子系统具有很强的灵活性 : EDA; VH DL; 层次化; 出租车计费器 :T N 1-34; T P368. 1 : A : 1004-373X(2011) 16-0023-02 Design of Taximeter Based on EDA Top- to- down Layering Method M ENG Zhong ( School of Inf ormat ion Science and Engineering, Southeast U niversity , Nanjing 2100 6, China) Abstract : MCU is generally taken as a core component for design of t aximeter . The method is not flexible to some extent . Therefore, a design method of T aximeter based on EDA top-to-down layering method is introduced in this paper. Each func- t ional module is com piled w ith VHDL to realize the low level design and schemat ic diagram input mode is adopted to describe the relation among various modules to realize the top level design. The designed control unit of the new type of taximeter is based on FPGA, and no peripheral circuit is need. Functions can be updated by modifying t he softw are only. The example is test ed and verified. The result shows that t he method is efficient and reliable. Besides, designed digital system has high flexi- bility . Keyw ords: EDA; VHDL; top-to-dow n layering; taximeter 0 1 EDA : ; , ( 1) , 7. 0 ; ,