可调线性稳压电源设计 本科毕业设计.docVIP

四川师范大学成都学院专科毕业设计 可调线性稳压电源设计 学生姓名 × × × 学 号 ×××××××××× 所在学院 电子工程学院 专业名称 应用电子技术/汽车电子技术 班 级 2012级 指导教师 × × × 四川师范大学成都学院 二○一五年五月  可调线性稳压电源设计 学生：余鸣凤 指导老师：王北川 内容摘要：随着时代的发展，数字电子技术已经普及到我们生活、工作、科研及各个领域。本文将设计一种数控直流稳压电源，本电源由单片机电路、显示电路、数模/转换电路、放大电路四部分组成。其中单片机电路用于控制电压信号的输入，数字/模拟转换电路用于将数字信号转换为模拟信号，显示电路用于显示电源输出电压的大小。同时本文分析了数字技术和模拟技术相互转换的概念。该稳压电源与传统的稳压电源相比，本设计具有操作方便，电源稳定性高及输出电压大小采用数码显示的特点。数字化正负可调双路直流稳压电源模块是针对传统智能电源模块的不足提出的，数字化能够减少生产过程中的不确定因素和人为参与的环节数，有效地解决电源模块中诸如可靠性、智能化和产品一致性等工程问题，极大地提高生产效率和产品的可维护性。 关键词：单片机AT89S52 DAC0832 LM393 LM7915 数码管  Design of adjustable?linear regulated power supply Abstract: With the development of the times, digital electronic technology has spread to our lives, work, research and in various fields. In this paper, the design of a NC DC regulated power supply, the power supply is composed of MCU circuit, display circuit, analog / conversion circuit, amplifying circuit composed of four parts. The singlechip circuit is used for controlling the voltage of the input signal, digital / analog conversion circuit for converting a digital signal to analog signals, a display circuit for displaying the output voltage. At the same time, this paper analyzes the concept of digital technology and simulation technology of mutual conversion. Compared with the traditional regulated power supply regulated power supply, the design has the advantages of convenient operation, using the high stability of powerand the output voltage digital display characteristics. Digital positive negative adjustable dual DC regulated power supply module is put forward aiming at the shortage of traditional intelligent power module, digital will reduce the uncertain factor sand human participation number in the production process, effectively solve the problems such as reliability, intelligent and product consistency and other engineering power module,which greatly improve the production efficiency and the product maintainabi