MPLS 配置.docVIP

1、地址 2、各个router 的IGP 3、MPLS ip cef mpls label protocol ldp mpls ldp router-id loopback 0 force int 接口 mpls ip 4、 VRF ip vrf forwarding name rd : between pe and pe match (stay the same ) rouer-target : if there are multi routr-target than match multi router 5、pe-to-ce 之间的协议 ospf :no address-family router ospf process vrf name network …… redistribute bgp eigrp : pe-router first global AS then address-family ipvr vrf name redistribute bgp AS metric value network ----- autonomous-system AS (match ce eigrp AS) rip : address-family ipv4 vrf name redistribute bgp as metric value network …… note: rip version same 6、BGP command in pe router router bgp as neighbor ip remote-as as neighbor ip update-source loopback address-family ipv4 vrf name redistribut protocol address-falmily vpnv4 unicast neighbor ip activate neighbor ip sent-community both exit OK