高容量传输节点解决方案.ppt

内 容 安 排 OPTera Connect DX 特点 OPTera Connect DX 支持多种交叉连接方式 OPTera Connect DX 强大的交叉连接能力 每个 10Gb/s 网元可提供两块交叉连接卡并工作在1:1保护状态。 每个交叉连接卡具有 384xVC4 (60G) / 512xVC4 (80G) / 768XVC4 (120G) / 的交叉连接能力。 交叉连接能力可根据业务需要在线升级 OPTera Connect DX 交叉连接卡选择 OPTera Connect DX的前向赳错功能(FEC) FEC的纠错码通过 STM-64 的开销字节传送，不占用用户的净负荷。 FEC的纠错和计算功能由接收器完成。 用户可根据需要通过网管 “ 开启 ”或 “关 闭 ” FEC。 在FEC “开启 ”状态下，10G系统的BER将由10-12下降到10-15以下；或增加2dB的链路预算。 OPTera Connect DX的中间路径的性能监测功能IPPM) IPPM 参数跨越所有的 VC-4 带宽 可向用户提供段、线路以及端到端的通道性能监测数据 10G 平台所提供的所有监测数据可帮助用户进行故障诊断 OPTera Connect DX – 功能小结 灵活的网络结构 端到端的业务调配 interWAN: 即时带宽配置 灵活的网络结构 OPTera Connect DX – 城域网和区域网应用 OPTera Connect HDX - 结构 太拉比特核心交叉子系统 OPTera Connect HDX – 2.56 Tbps 解决方案 OPTera Connect HDX – 7.64 Tbps 解决方案 OPTera Connect HDX 扩展能力 OPTera Connect 连接管理演进 Enhanced grade of service STM-64 BER performance of 10-15 with FEC exceeds existing 10-12 industry benchmark High density architecture 20 Gbit/s tributary traffic in a single 2200mm rack Optimised use of space Reliable intershelf cabling Faster installation and cable routing Optimised service platform Optimised for optical interfaces, STM-64, STM-16, STM-4, STM-1o DCC hubbing on all tributaries enables SDH networking Supports mixed optical tributaries and concatenated payloads VC4 bandwidth management Bandwidth management capabilities Flexible product applications Common hardware platform for Linear, Ring, OP AMP and Regenerator HPOM/IPPM provides VC-4 performance monitoring Line optics support multi wavelength operation for both N-DSF and DSF applications OAM network integration OAM architecture compatibility allows for smooth introduction of product into operations center Fully supported by Integrated Network Manager The bandwidth provisioning scenario illustrated above demonstrates the value of point-to-point interWAN as a backbone interconnection technology. Today, a switch or router would typically be connected to the backbone trunks via TDM (Time Division Multiplexing) SDH tributaries such as the OC-12