FME 使用手册.xlsVIP

Sheet3 Sheet2 Sheet1 Replaces the geometry of the feature with a two-dimensional arc whose shape is set by the parameters, which can be either constant floating point values or the values of existing attributes. Replaces the geometry of the feature with a two-dimensional box whose minimums and maximums are fixed val-ues, or are taken from attributes in the original feature. Replaces the geometry of the feature with a two-dimensional ellipse whose shape is set by the parameters. Replaces the geometry of the feature with a two-dimensional point whose ordinates are taken from attributes in the original feature. Replaces the geometry of the feature with a three-dimensional point whose ordinates are taken from attributes in the original feature. Replaces the geometry of the feature with a two-dimensional circular arc whose shape is estimated from the first, middle, and last point of the linear feature passed in. Replaces the geometry of the feature with a two dimensional box whose minimums and maximums are taken from the bounds of original feature. Adds a two-dimensional point as the last vertex of the feature. The ordinates are taken from attributes in the original feature. Adds a three-dimensional point as the last vertex of the feature. The ordinates are taken from attributes in the original feature. Removes a single coordinate from the geometry of the feature. Calculates a Military Grid Reference System (MGRS) code based on the latitude and longitude values supplied in a features attributes. Computes topology on input point, line, and/or area features. Creates a grid of two-dimensional point features, at the origin and using the offsets specified. 按格网方式生成一批二维点状要素，须指定原点和间距 将输入的一批要素改为按格网方式生成的二维点状要素，格网的范围（至少）覆盖全部输入要素的外接矩形，格网间距须指定 给要素增加一个二维的节点（最后一个节点），其坐标由原始要素的属性获得 改为二维的点，其坐标由原始要素的属性获得 改为二维圆弧（注：原文如此），圆弧的形状由参数控制，例如常数或属性值 根据参数创建三维要素，并输入转换流程 改为三维要素，Z坐标由指定的属性或常数获得 三维插值：沿着一个线状要素、根据起始值和结束值内插高程 给要素增加一个三维的节点（最后一个节点），其坐标由原始要素的属性获得 改为三维的点，其坐标由原始要素的属性获得 坐标仿射变换 仿射纠正，用于纠