TP-LINK WR703N 3G Router settings.docVIP

TP-LINK WR703N 3G Router settings Before setting up the router, you need to set you computer “Internet Protocol (TCP/ IP) Attribute” to “自动获得IP地址(To obtain an IP address automatically)”and “(自动获得DNS服务器地址)Automatically obtain DNS server address” -- As shown in the directions “2设置计算机” After install the Network card successfully, connect your computer to wire network —As shown in the directions “3无线网络连接” Next start to set up the router Open the Web Browser, enter 192.168.1.1, and enter the user name –(admin) and password -(admin) Then we can see the setting interface, and click “设置向导” of the navi