IDPoint的使用.docVIP

Identification Point? Definition 定义 In many warehouses, certain storage types (such as high rack storage areas) require identification (ID) points. The transfer of all storage units into these storage types must be accomplished via（通过……完成） the ID point. In WM, the ID point is a physical location in a warehouse managed for storage units （存储单元）where incoming goods are identified for further processing（处理）. 在很多仓库，某些存储类型（像高架库区）要求ID point.所有存储单元向存储类型的转移必须通过ID point来完成。在WM里，在为存储单元而做的仓库管理里面，ID point是为了识别收货便于以后处理而设的一个点。 Use The transfer of stock from the goods receipt area via an ID point into a high rack storage area is illustrated in the following graphic. 从入库端通过ID point进入高架库的转移过程如下图描述 For example, if you have assigned （指派）the ID point storage type 011 to storage type 010, when you attempt to store goods in storage type 010, the system will automatically send them to ID point storage type 011 first. 举个例子，如果已经指派ID point存储类型011到存储类型010，当你尝试把货物存到010存储类型时，系统会自动先送到011存储类型。 When goods are transferred from the goods receipt area to the ID point, the system assigns dynamic coordinates to the storage bin using the quant number. This is illustrated in the following graphic: 当商品从入库端送到ID point时，系统通过改变搭配用q编号指派货物到托盘上。如下图所示： For mixed pallets, the system arbitrarily selects one of the quant numbers from the materials in the storage unit. 对于混合的托盘，系统从原存储单元随即挑选其中一个q号。 Structure 构造 An identification point can be used for the following purposes: ID point有如下功能： Comparison of system information to actual contents 比较系统信息和实际目录 Since storage units are identified by their storage unit number when they are put away, the contents of each storage unit can easily be displayed on the computer screen. This makes it possible to make a rough comparison of the system information with the physical contents of the storage unit. 从存储单元上架时通过单元号被识别后，所有存储单元的目录会显示在计算机屏幕上。使得将系统信息和实际目录做一个粗略的比较成为可能。 Contour control 外形检测控制 An automatic contour control is often carried out at the ID point to determine whether the stor