毕业设计（论文）-三明治板横向焊接接头的设计.docVIP

摘 要 金属三明治板是在上下两块金属面板之间放置支撑芯板，通过连接使之形成一个整体结构，具有减重、绝热、防火和抗冲击等诸多优点。三明治板在焊接成型的过程中，板与板之间的连接可以采用多种形式。不同的接头形式和不同的接头设计参数会对接头处应力集中的位置和大小产生影响，从而影响了其用范围，因此设计出合理的接头形式和合适的接头参数显得十分重要。采用有限元模拟的研究方法可以有效地节约成本，提高效率。应用Abaqus大型通用有限元分析软件 关键：；；； Abstract Core panels is placed between the upper and lower to support metal sandwich plate to form a unitary structure with quite a number of advantages ,such as light weight , insulation, fire protection and impact resistance. In the process of welding metal sandwich plates ,many forms connection can be taken between the panels and panels welding . It will consume lots of time and material resources to study all forms of welded joints and the applicability of using experimental research methods . So finite element simulation research method can effectively reduce costs and improve the working efficiency.Different joint forms and different design parameters ,which has a impct on the location and size of the stress concentration,will influcence its suitable range application. Thus it is important to design a reasonable form and proper fitting parameters affecting the scope of its, and therefore design a reasonable form fitting and proper fitting parameters .In this paper, through the application of Abaqus finite element analysis software, the lateral side welding joints and structural sandwich panels longitudinal joints and L-joints and T-joints were simulated welding respectively,.we optimized the simulation of the entire process by the method of orthogonal test, in order to get the best form and parameters of welded joints. Key words:Sandwich board; Finite element simulation; connector design; orthogonal test 目 录 1 绪 论 1 1.1 课题背景及意义 1 1.2 三明治板的国内外现状及发展趋势 1 1.3 ABAQUS软件的应用和发展 2 1.3.1ABAQUS的概述 2 1.3.2ABAQUS的功能 3 1.4正交试验方法的概述和应用 4 1.4.1正交试验方法的概述 4 1.4.2正交试验方法使用的要点 6 1.5本课题的研究方案 7 2 三明治板纵向接头设计 8 2.1三明治板纵向接头的数值模拟 8 2.1.1绘制正交表 8 2.1.2建立模型 9 2.1.3设置分析步 10 2.1.4在模型上设立相互作用 10 2.1.5在模型上施加边界条件和载荷 11 2.1.6模型的网格的划分 11 2.1.7创建分析和作业 12 2.2三明治板纵向接头