SECTION 11500.docVIP

SECTION 11500 SHOP EQUIPMENT PART 1 - GENERAL 1.01 DESCRIPTION OF WORK A. Provide Shop Equipment as indicated on Drawings and specified herein. B. Manufacturers names and model numbers are indicated for purposes of establishing relative quality, type, size, and requirements. C. The following Sections contain requirements that relate to this Section: Motors and Control Equipment Section 16480 Mechanical and Electrical Work connected to the equipment Division 15 Division 16 1.02 SUBMITTALS A. Product Data Provide manufacturers model number, product description and specifications for each equipment item to be used on the project. B. Shop Drawings 1. Provide complete shop drawings showing room locations, model numbers, dimensions, attachment details, etc., for all pieces of equipment. 2. Approval shall not in any way relieve the Contractor from the responsibility of the proper fitting and construction of the Work in strict accordance with the Contract requirements or from the necessity of furnishing materials and workmanship required by the Drawings and Specification which may not be indicated on shop drawings when approved. Any materials which are not in accordance with the Drawings and Specification must be clearly indicated and a specific and separate request for the approval of such materials shall be made in each case. 3. Do not order or deliver items until shop drawings and product data have been approved by the Authority. C. Quality Control Submittals 1. Samples a. The Contractor shall furnish for approval all samples required as hereinafter specified; also in all cases where material and quality are not definitely specified, samples or specimens shall be submitted to the Authority for approval. The Work shall be in accordance with approved samples. b. To ensure prompt consideration of samples, a letter, mailed on the date of shipment shall contain a list of samples that have been forwarded together with the brand and the name of the manufacturer of