SKODA RCD510 Multimedia Video GPS Installation--Delphi.docVIP

SKODA RCD510 Multimedia Video GPS Installation--Delphi Video Unit features: It is for SKODA RCD510 Radio head unit Delphi monitor. to up date the original screen play after market DVD, TV, rear camera, GPS, other video unit can use original touch screen to operate GPS function Built-in GPS, very easy and excellent operation.can be suitable for GARMIN, IGO8, etc Window CE system. Built-in FM sound transmittion, when you set the original Radio into FM87.9, then you can hear the sound from original speaker when you connect after market DVD, TV, etc. DIP5: when car is with original rear camera, set it in UP position, when car is without original rear camera, set it Down position to after-market rear camera available. It you do not need to our unit built-in GPS, then you can also use external NAVI BOX to connect with our video interface. Use original button switch the function. 100% plug and play. GPS Technical Data: Main Control Processor: SiRF Atlas IV, and main frequency: 500MHZ main storage: 64M ,128M (optional:DDR I) Flash storage: 64M,128M,1G,2G (optional:Nand flash ) video output format: RGB，CVBS，YC，digital: RGB565 Synch signal: composite sync signal, and synchronizing signal separation video output system: NTSC，PAL video output resolution: 320X240,400X234,480X234,800×480 GPS antenna power: 3-5V 9. Operation system: WINCE.NET 6.0 Core Version 10. Input voltage: 5V-24V 11. Touching panel connection: 4PINS resistance touching function 12. Memory Card: SD/MMC/SDHC（SDHC）4GB~32GB 1. After detach the Radio, remove these screws 2. detach original Touch cable connection To instal touch function. 3. Original touch cable and connector connection 4. Our Golden Cable instruction 5. our Golden cable 1 marked to connect with original 6. Our golden cable marked 2 to connect original touch golden cable Marked 1 as picture 3 connector marked 2, as picture 3 7. Detach original FPC cable connec