机械毕业设计（论文）-B1400带式输送机刮水器设计【全套图纸】.doc

B1400带式输送机刮水器设计 摘要 带式输送机是连续运输机中效率最高、使用最普遍的一种机型。带式输送机广泛应用于火电厂、采矿、冶金、港口等部门。 带式输送机刮水器是带式输送机的辅助设备，该设备主要在料场露天输送带在启动时将上积存的雨水及时刮掉，避免积存在上的雨水进。 关键词：输送带输送机；犁式刮水器；托辊 全套图纸，加153893706The Design of wipers of B1400 Belt Conveyor Abstract The belt conveyor is the most efficient and the most commonly machine in continuous transport device. It is widely used in thermal power plant, mining, metallurgy, the port and so on. The wipers of belt conveyor are belt conveyor’s auxiliary equipment. The equipment is mainly installed in the open yard of the head and tail belt. It is used to scratch-off water in time to avoid the water into materials so that affect the nature of materials when the belt conveyor starts. The device has a simple structure, easy maintenance, low cost and low power consumption, adaptability. In this design, motorized fader is selected as the drive mechanism through analysis and comparison. Its advantages are action sensitive, stable, reliable, no noise, small size, light weight, big push pull, wide speed range, easy handling, low price. After determining the total design, design the structure of pinto roller, rod, roller frame, electric putt, putt electric frame, putting support, live section bolts and choose standard parts, tolerance level. The design of the wipers use roller-type, its advantages are small friction, small injury. It is a breakthrough in the traditional plow relative wipers. Keywords: conveyor belt; wipers plow; roller 目 录 摘要 I Abstract II 1绪论 1 1.1带式输送机刮水器概述 1 1.2带式输送机刮水器存在的问题 1 1.3本课题主要研究的内容 2 2设计过程 3 2.1 槽型托辊架设计 3 2.1.1 选辊子 3 2.1.2 架的设计 3 2.2 平托辊组架的设计 5 2.2.1 选辊子 5 2.2.2 架的设计 5 2.3 平托辊组架支撑架的设计 6 2.4 平托辊组架拉杆的设计 7 2.5 拉杆支架的设计 8 2.6 中间架的选择 8 2.7 支撑架的选择 9 2.8 托辊驱动架的设计 10 2.9 刮水托辊拉杆的设计 11 2.10 电动推杆的选择 12 2.11 电动推杆支座的设计 12 2.12 摇杆的设计 12 2.13 转轴的设计 14 2.13.1 键的选择 14 2.14 公差与配合的选择 14 结论 16 参考文献 17 致谢 18 1绪论 1.1带式输送机刮水器概述 近二十多年来，我国电力工业迅速发展，随之而来的是电厂的用煤量也是与日俱增，电厂的用煤一般都是由轮船或火车运到厂内卸下，用带式输送机输送到煤场或原煤仓。带式输送机是连续输送物料机械中效率最高、使用最普遍的一种机型，是电厂输