毕业设计（论文）-活塞的机械加工工艺_典型夹具及其CAD设计.docVIP

专科毕业设计（论文） 题目：活塞的机械加工工艺，典型夹具及其CAD设计活塞的机械加工工艺，典型夹具及其CAD设计 夹具检查工艺设计Piston machining process, fixture and its typical CAD design Abstract This design components are a beam holder.Selects the QT40-10 steel. According to the components shape, the size precision, the production economic efficiency and so on various aspects multianalysis its processing craft, uses the special purpose machine processing much. Through to the components analysis, this axis required accuracy is high, the working procedure suitable centralism, the request is smooth, therefore selects the tool and the size wants.Finally carries on the examination to the components.In order to achieve the components precision the request. Key word：Jig, examination, technological design 目 录 摘要 1 工件的结构分析……………………………………………………………… 05 2 工艺工序安排………………………………………………………………… 06 3 切削用量的确定……………………………………………………………… 06 4 夹具体的设计………………………………………………………………… 07 5 配油盘受力分析与设计……………………………………………………… 07 5.1配油盘受力分析…………………………………………………………… 07 5.1.1压紧力yp………………………………………………………………… 16 5.1.2分离力fp………………………………………………………………… 17 5.2配油盘设计………………………………………………………………… 11 5.2.1过渡区设计……………………………………………………………… 11 5.2.2配油盘主要尺寸确定…………………………………………………… 12 5.2.3验算比压p﹑比功pv…………………………………………………… 13 6 缸体受力分析与设计………………………………………………………… 14 6.1缸体的稳定性……………………………………………………………… 14 6.2缸体主要结构尺寸的确定………………………………………………… 14 6.2.1通油孔分布圆半径fR?和面积F……………………………………… 14 6.2.2缸体内﹑外直径1D﹑2D的确定……………………………………… 15 6.2.3缸体高度H……………………………………………………………… 17 7 柱塞回程机构设计…………………………………………………………… 17 8 斜盘力矩分析………………………………………………………………… 19 8.1柱塞液压力矩1M………………………………………………………… 19 8.2过渡区闭死液压力矩…………………………………………………… 20 8.2.1具有对称正重迭型配油盘……………………………………………… 20 8.2.2零重迭型配油盘………………………………………………………… 21 8.2.3带卸荷槽非对称正重迭型配油盘……………………………………… 21 8.3回程盘中心预压弹簧力矩3M…………………………………………… 22 8.4滑靴偏转时的摩擦力矩4M……………………………………………… 22 8.5柱塞惯性力矩5M………………………………………………………… 23 8.6柱塞与柱塞腔的摩擦力矩6M…………………………………………… 23 8.7斜盘支承摩擦力矩7M…………………………………………………… 23 8.8斜盘与回程盘回转的转动惯性力矩8M………………………………… 23