采矿工程毕业设计（论文）-鸡西矿业集团小恒山煤矿1.8Mta新井设计【全套图纸】.doc

摘 要 本设计为鸡西矿业集团小恒山煤矿1.8Mt/a的新井设计，共有4层设计可采煤层，分别为3#上、3#下、18#和34#。煤层倾角11°，地质构造简单。井田平均走向长4400m，平均倾斜长4500m，煤层总厚度为6.5m。设计井田的工业储量为184.80Mt，可采储量为136.08Mt。服务年限为54a。 本设计矿井采用双立井的开拓，划分两个水平开采。两个水平均为上、下山后退式开采，采用带区式准备，采煤工艺为综合机械化采煤。矿井共划分8个带区，其中达产带区为2个，达产工作面2个。本设计带区为西一带区，大巷装车式下部车场，大巷运输采用两台10t架线式电机车牵引3t底卸式矿车。采用“四·六”式工作制，年工作日为330d，工作面长为210m，每刀进度为0.6m，每日割九刀。 提升设备为主井采用箕斗提升，副井采用罐笼提升。每日净提升时间为16h。 由于井田倾斜长度较大，且为缓倾斜煤层，以及煤层地质条件等因素影响，决定本井田内全部采用倾斜长壁采煤法开采。 由于本人能力有限，缺乏一定的现场经验。因此，本设计中难免会出现一些问题，请各位专家老师不吝指正。 关键词 可采储量 采煤工艺 矿井设计 全套图纸，加153893706Abstract This design for the Jixi mining industry group small Mt.Hengshan coal mine 1.8Mt/a new well design, altogether has 4 designsto be possible to pick the coal bed, respectively is on 3#、under 3#、18# and 34#. The coal bed inclination angle 11°, the geologicstructure is simple. The well field equally moves towards long 4400m, medium bank long 4500m, coal bed total thickness is 6.5m, belongs to the coal bed. The design well field commercial production is184.80Mt, the recover ableresources is 136.08Mt. The service life is 54a. This design mine pit uses the double vertical shaft the developmentway, delimits divides two levels mining. Two water averages for on,descend a mountainmining. Uses the belt area type preparation,backlash type mining, the mining coal craft for synthesismechanization mining coal. The mine pit altogether divides 8 beltsareas, in which reaches produces the belt area is 2, reaches producesworking surface 2. This design belt area for the west area area, thebig lane installs lower part the car type the cart yard, the big lanetransportation uses two row 10t electric locomotive to tow the 3t mine car. The year working day is 330d, the use four, sixthe type work system, the work face length is 210m, each knifeprogress is 0.6m, shears 9 knives every day The lift technique primarily well uses the promotion,the vice- well uses the cage promotion. Only promotes the time is 16hevery day. Because the well field inclines the length