毕业设计（论文）-自然变向式平面转弯带式输送机设计（含全套CAD图纸）.doc

摘 要 普通带式输送机只能水平运输，但是由于地质条件的限制，需要带式输送机能够转弯运行针对这一问题，对平面转弯理论进行了研究，以SDJ-150型带式输送机结构为基础，本设计采用使托辊具有安装支撑角和构成内曲线抬高角措施，并对过渡段和转弯段进行合理设计，经过计算SDJ-150型可伸缩带式输送机经改造后可以实现平面转弯运行。通过对SDJ-150可伸缩带式输送机进行的改造使其能够实现平面转弯运行，解决了在特殊地质条件下，单台带式输送机自然转向问题，同时减少了设备的数量、减少初期投资和减少巷道开拓量，使运输系统变得简单便于维护，从而发挥了SDJ-150可伸缩带式输送机的优点，满足了高产高效的要求，同时也表明，普通带式输送机实现平面转弯运行是无转载连续转弯运输合理设计方案。 关键词 带式输送机 转弯理论 转弯设计 安装使用 全套完整版CAD图纸等，加153893706 Abstract The general level of the transport belt conveyor only, but due to geological conditions of the restrictions, the need for belt conveyor to turn operation of this issue, on the theory the plane turn on to SDJ-150-type structure based on the belt conveyor This design uses a roller to support the installation angle and composition of the elevation angle of measures and the transition, and of turning a reasonable design, calculated SDJ-150-retractable belt conveyor can be achieved through improved operational plane bend . Through the SDJ-150 retractable belt conveyor for the transformation to enable it to achieve plane turning operation, a solution in the special geological conditions, natural belt conveyor to a single issue, while reducing the number of the equipment, reducing the initial investment And reduce the amount of roadway open up so that the transport system for easy maintenance, which played a SDJ-150 retractable belt conveyor of the advantages of a high yield and high efficiency to meet the requirements, but also show that the realization of the general belt conveyor plane turning operation No change is reproduced for the reasonable design. Key words belt conveyor turning theory design installation use of turn 目 录 摘 要 I Abstract II 第1章 绪 论 1 1.1普通带式输送机 1 1.1.1带式输送机的组成 1 1.1.2带式输送机的结构工作原理 1 1.1.3带式输送机的应用 2 1.2带式输送机发展趋势 2 1.3平面转弯带式输送机 3 1.3.1输送机实现平面转弯措施 3 1.3.2带式输送机转弯的方案 5 1.3.3 实现转弯方案的确定 7 第2章SDJ-150型可伸缩带式输送机结构概述 8 2.1机器的用途和特征 8 2.2主要技术参数 8 2.3工作原理 9 2.4结构概述 10 2.4.1机头传动装置 10 2.4.2 储带装置 11 2.4.3收放输送带装置 12 2.4.4无螺栓连接支架 12 2.4.5 机尾移动装置 12 2.4.6 机尾 13 第3章 带式