毕业设计（论文）-基于嵌入式移动设备网络视频播放器的实现.docVIP

移动设备网络视频播放器的实现 摘要 随着手机等移动设备的视频播放器的实现arm-Linux；QT；Mplayer； The Design of MP3 Player Base on Embedded Linux Operation System and QT GUI Tool Abstract As embedded systems are widely used in various fields of national economy, the research on embedded systems has very important practical significance. This article describes is the MP3 player which based on embedded Linux and QT design and implementation. In this paper, UP-TECH 2410 embedded development board as the hardware platform, QT4.5.3 as the core development tools, in the embedded Linux system, the implementation of the MP3 player program design and implementation. To the hardware platform, this paper firstly introduces the core part of UP-TECH 2410, and then analyses the circuit of serial port, Audio Circuit, LCD, Touch Screen, network card and other important peripheral circuits. To the software platform, after introducing a cross-platform QT application - QT Designer, QT signal and slot mechanism, QT event processing technology, this paper then focusing on the achievement of GUI based on QT. In this paper also show the result that MP3 player run in the UP-TECH 2410 embedded development board. What’s at last is the explaining of configuring exploitation environment and the review and expectation of this paper. Keywords: Embedded system; Linux; QT; MP3; Player 目录 摘要 I Abstract II 目录 III 第一章 概 述 1 1.1课题背景 1 1.2课题理论意义与运用 2 1.3 QT介绍 2 1.4本文主要内容与组织结构 3 第二章 硬件相关介绍 3 2.1开发平台介绍 3 2.1.1核心模块 4 2.1.2主板资源 4 2.1.3软件资源 4 2.1.4本设计所用到的硬件平台 5 2.2硬件平台详细介绍 5 2.2.1核心板电路 5 2.2.2 以太网接口电路 7 2.2.3 音频电路 9 2.2.4 触摸屏和LCD电路 11 2.2.5 电源电路 13 2.2.6 复位电路 13 第三章 软件设计流程 13 3.1 系统软件体结构系构 13 3.2 设计工具与相关技术介绍 15 3.2.1 Qt Designer 15 3.2.2 QT信号与槽机制 15 3.2.3 Qmake 16 3.2.4 QT的事件处理 16 3.3 MP3播放器设计与实现 17 3.3.1 MP3 播放器模块化设计思想 17 3.3.2“播放”按键功能的设计与实现 18 3.3.3 “停止”和“暂停”按键功能的设计与实现 19 3.3.4“添加”按键功能的设计与实现 19 3.3.5“上一曲”“下一曲”按键功能设计与实现 19 3.3.6 “滚动字幕”设计与实现 20 3.3.7 MP3播放器运行效果 21 第四章 开发环境配置 23 4.1 开发环境的搭建与使用 23 4.2 系统运行环境分析 24 第五章 总结与展望 28 5.1设计总结 28 5.2