毕业设计（论文）-图形在电子显示屏上实现的设计.docVIP

图形在电子显示屏上实现的设计 摘 要 电子显示屏的应用范围越来越广泛，它作为一个重要的宣传平台，已经受到全社会的普遍认可，本设计采用单片机为控制核心，通过8*8LED电子显示屏及相关的外围电路，设计制作了一个16*16点阵LED电子显示屏。 本文主要内容是基于,阐述了16*16点阵LED显示屏的设计原理与思路，详细叙述了系统硬件、软件的具体实现过程，本论文重点阐述了显示模块及相关驱动模块等模块化设计思路与制作方法。主要是以美国ATMEL公司生产的40脚单片机AT89S52为核心，利用AT8952单片机作为控制器件,采用设计一个LED点阵显示模块硬件结构、点阵显示屏原理图、循环扫描过程、字模编码的提取、编程流程图、C51部分程序以及试验结果。该系统可AT89S52单片机Design of graphic in the electronic display Abstract Electronic display more and more extensive range of applications, it is important as a communications platform, has been widely recognized by the whole society, this design uses the microcontroller as the control center by 8 * 8LED electronic display and related peripheral circuits, design a 16 * 16 dot matrix LED electronic display.  The main contents are based on microcontroller design LED dot matrix display, described LED 16 * 16 dot matrix display design principles and ideas, described in detail the system hardware and software realization process, this paper focuses on the display modules and related modules, such as modular drive design ideas and production methods. Produced mainly in the United States, 40 feet ATMEL AT89S52 microcontroller core, using AT89S52 microcontroller as a control device, using 74HC154 and 74HC595 design a 16 * 16 LED dot matrix display. Introduced for the control system for its electronic display LED dot matrix design and development process. The chip is controlled by a row driver and column driver 74HC595 74HC154 to drive the display shows. The electronic display can display a variety of text or monochrome images, full screen can only display a character, using four 8 * 8 dot matrix LED display module to form a 16 * 16 dot matrix display mode. Display dynamic display, making the graphics or text to achieve stationary, moved out of the other display. Described in detail the hardware LED dot matrix display circuit design ideas, the function of various parts of the hardware circuit and the principle, the corresponding software program design and t