工业工程毕业设计（论文）-转向架构架工序联合作业分析.doc

摘 要 联合作业分析是指当几个作业人员共同作业于一项工作时，对作业人员时间上的关系的分析，以及排除作业人员作业过程中存在的不经济、不均衡、不合理和浪费等现象一种分析方法。发现空闲与等待的作业时间使工作平衡减少周期（程）时间获得最大的机器利用率决定最合适的方法Abstract Means that when the joint operation of several operators in a collaborative work, staff time for work on the analysis of the relationship, and the removal of workers do not exist during the operation of economic, unbalanced and unreasonable and a waste of such phenomena, two or more operators while the work of a single device or the operation of a targeted analysis of human and machine, with interpersonal relationships. To try to cancel the human, machine idle time, people and machines, between people balance work and shorten the duration of an analytical method. The railway vehicle bogie is the most important parts of one of its direct bearing body weight, to ensure that the vehicle passed the curve. Meanwhile, the truck also directly determine the various parameters of the vehicle stability and ride comfort of vehicles. Is an important part of the locomotive. Based on the bogie frame analysis of the actual production, respectively, from idle and waiting for the job that time, the work balance, reduce the cycle (range) time and maximize machine utilization, determine the most appropriate methods, the system on the bogie frame production was improved. Affect its production capacity of the factors analyzed in depth, the use of clever 5W1H, ECRS and flexible production line theory method is proposed rearrangement processes, improve methods of operation and internal management team to enhance the level of outsourcing to improve the program, and the results were improved quantitative evaluation. Joint operation of the use of the joint operation plans and other advanced analysis methods, the improvement of the bogie and crossed processes were quantified before and after improvement compared. Key words: joint task analysis job analysis chart work balance 5W1H 目 录 第一章 绪论 1 1.1课题研究背景 1 1.2发展现状 2 1.3研究内容与方法 5 1.4课题基本思路 5