毕业设计（论文）-红外智能心率计设计.docVIP

题 目： 学生姓名： 学 号： 指导教师： 专 业： 二零年月摘 要 红外线关键词：ABSTRACT Infrared, pyroelectric, ultrasonic, etc., have universal applicationed to peoples daily lives.It is already widespread in application in the real life, because of its low-power, high-performance, interference obtained advantages. However, the infrared control is the most widely used one. As we known ,infrared-guided, infrared ranging, infrared heating on the infrared have played in a variety of different fields its own special features, but the Infrared Intelligent heart rated into account,health care, life to enjoy its unique role. Therefore, ,it is essential to understanding the principle of its work, the circuit structure is very much needed. In this paper, it was designed a processing chip MC3373 based on infrared infrared intelligent heart rate meter. This design is the core of TNL104 generated by infrared light-emitting was detecting the body of the fingertip or earlobe site, and mounted on the other side of the site, and nexted to the electro-optical transistor 9013 to detect the body more transparent organization, then it is converted into electrical signals,after that by MC3373 waveform processing and simultaneous counting and timing applications, the eventual realization of infrared detection of human heart rate. Key words:light-emitting diode; optical transistor; MC3373; heart rate meter目 录 绪 论 1 1.1 课题背景及来源 1 1.2 热释电红外报警器的发展现状 1 1.3 本课题所研究的内容 2 2 红外智能心率计的研究背景 3 2.1 红外探测原理 3 2.2 红外发光二极管与光电三极管的介绍 3 2.2.1 工作原理与性 3 2.2.2 光电三极管9013的工作原理与性能介绍 4 2.3 红外探测的优缺点 5 2.4 红外智能心率计的结构图 6 2.5 设计方案介绍 6 2.5.1 红外智能心率计 6 2.5.2 数字心率计 7 3 红外智能心率计的设计 8 3.1 工作原理和原理框图 8 3.2 红外智能心率计前端主要功能描述和设计 9 3.2.1 9 3.2.2 MC3373芯片的说明 9 3.3 红外智能心率计后端主要功能描述和设计 12 3.3.1 后端工作原理图 12 3.3.2 二进制计数器介绍 13 3.3.3 数码显示芯片介绍 15 总结与展望 16 致 谢 17 参考文献 18 绪 论 1.1 课题背景及来源 的发展现状 红外线属于一种电磁射线，其特性等同于无线电或X射线。人眼可见的光波是380nm-780nm，发射波长为780nm-1mm的长射线称为红外线。早在1938年，有人就提出利用热释电效应探测红外辐射，但并未受到重视。直到六十年代，随着激光、红外技术的迅速发展，才又推动了的研究和应用