毕业设计（论文）-自动丝印机设计.docVIP

重庆大学本科学生毕业设计 （论文） 自动丝印机设计 学 生： 学 号指导教师： 专 业：机械设计制造及其自动化 重庆大学机械工程学院 二O一二年六月 Graduation Design (Thesis) of Chongqing University Design of Automatic Screen Printing Machine Undergraduate: Hu Yang Supervisor: Prof. Wang Qiuxiao Major: Mechanical Design Manufacturing and Automation College of Mechanical Engineering Chongqing University June 2012  摘 要 自动丝印机在SMT生产线中是一个重要组成部分，对整个生产线起着重要的作用，本次设计中的自动丝印机包含自动丝印机构和自动贴片结构两个部分。本文以现有的手动丝印机进行改进和优化，通过改善机械结构，提高生产效率。 本文对自动丝印机的机械结构进行了整体设计，经过分析，设计了齿轮齿条传动的丝印系统和具有x-y联动定位系统的贴片系统。由于本设计面向的是小规模生产，所以并没有采用高速贴片头，而是采用简单的气缸驱动式单头贴片系统。本设计采用了先进的视觉识别系统来提高贴片精度。本文还对其关键部件齿轮齿条和丝杆转动进行了设计和分析。 本次设计用UG三维软件对整体机器进行了三维建模，对整体机器进行模型建立、性能分析，利用CAXA、Auto CAD ABSTRACT Automatic screen printing machine is an important part of the SMT production lines, plays an important role in the entire production line, automatic screen printing machine in the design contains two parts of the agency automatic screen printing and automatic placement structure. Improve and optimize the existing manual screen printing machine, improve production efficiency by improving the mechanical structure. The mechanical structure of the automatic screen printing machine, the overall design, analysis, design, rack and pinion drive, screen printing system and patch system with linkage x-y positioning system. This design for small-scale production, and there is no high-speed paste titles, instead of using a simple cylinder-driven single-head patch. This design uses advanced visual recognition system to improve the placement accuracy. The article also design and analysis of its key components of rack and pinion, and screw rotation. The overall machine design with UG three-dimensional software 3D modeling, to establish the model of the placement machine, performance analysis, CAXA, Auto CAD 2D drawing software to draw the diagram of a machine assembly drawing and an important component parts, calcul