LCD1602字符液晶滚动演示程序.docVIP

//---------------------------------------------------------------------------------- //LCD1602字符液晶滚动演示程序 //---------------------------------------------------------------------------------- #include reg51.h #include string.h #define uchar unsigned char #define uint unsigned int void Initialize_LCD(); void ShowString (uchar,uchar,uchar *); sbit K1 = P3^0; sbit K2 = P3^1; sbit K3 = P3^2; uchar code Prompt[]=PRESS K1 - K4 TO START DEMO PROG ; //待滚动显示的信息段落，每行不超过80个支符，共6行 uchar const Line_Count = 6; uchar code Msg[][80]= { Many CAD users dismiss schematic capture as a necessary evil in the , process of creating PCB layout but we have always disputed this point , of view. With PCB layout now offering automation of both component , placement and track routing, getting the design into the computer , can often be the most time consuming element of the exercise. , and if you use circuit simulation to develop your ideas, , you are going to spend even more time working on the schematic. }; //显示缓冲（2）行 uchar Disp_Buffer[32]; //---------------------------------------------------------------------------------- //延时 //---------------------------------------------------------------------------------- void Delayxms(uint x) { uchar i; while (x--) for (i = 0;i 120;i++); } //---------------------------------------------------------------------------------- //垂直滚动显示 //---------------------------------------------------------------------------------- void V_Scroll_Display() { uchar i,j,k = 0; uchar *p = Msg[0]; uchar *q = Msg[Line_Count]+strlen(Msg[Line_Count]); //以下仅使用显示缓存的前16个节空间 while (pq) { for (i = 0; i 16 p q;i++ ) { //消除显示缓冲中待显示行首尾可能出现的空格 if ( ( i==0 || i== 15) *p == ) p++ ; if (*p != \0) { Disp_Buffer[i] = *p++; } else { if (++k Line_Count) break; //p指向下一串的首地址 p=Msg[k]; Disp_Buffer[i] = *p++; } } //不足16个字符时用空格补充 for (j=i;j16;j++)Disp_Buffer[j] = ; //垂直滚动显示 while (F0) Dela