非标准状态下呋喃自硬树脂抗拉强度验收方法探讨.pdfVIP

2014 中国铸造活动周论文集 非标准状态下呋喃自硬树脂 抗拉强度验收方法探讨 1 2 1 梁家豪 ，谢树忠 ，刘春晶 （1. 广东省造型材料（福联）工程技术中心，广东 珠海 519180； 2. 珠海市斗门福联造型材料实业有限公司，广东 珠海 519180） 摘要：本文主要针对目前大部分铸造厂未能在“标准条件”下验收呋喃树脂自硬砂强度，导致检测结果与 标准值偏差较大，继而引发对生产应用的指导意义弱化及产生供需纠纷的情况。通过对在“非标准条件”下 呋喃树脂抗拉强度的验收方法进行探讨、研究及修正，使非标准状态下检测结果与标准状态下结果形成可 比参考。 关键词：非标准状态；呋喃树脂；抗拉强度；验收；探讨 The Research of the Acceptance Method about the Tensile Strength of Self-hardening Furan Resin under the Nonstandard Conditions 1 2 1 LIANG Jia-hao , XIE Shu-zhong , LIU Chun-jing (1. Engineering and Technology Center of casting molding materials (Fulian) in Guangdong provice, Zhuhai 519180,Guangdong；2. Zhuhai Doumen Fulian Molding Materials Industry Co.,Ltd.,Zhuhai 519180, Guangdong ） Abstract: In this thesis, mainly aiming at the condition that at present, most of foundries can not accept the tensile strength of self-hardening furan resin under the standard conditions, which lead to great deviation between testing result and the standard, and then cause the constitution that weaken guiding significance on the application of the production and produce dispute between supply and demand. By means of discussing, researching and revising the acceptance method of tensile strength of furan resin under the “nonstandard condition”, make the test result under nonstandard condition could be comparable to the reference with the test result under the standard condition. Keywords: nonstandard condition; furan resin; tensile strength; acceptance; discussing 1 行标对呋喃树脂抗拉