毕业设计（论文）-医药西林瓶锁铝盖机总体及系统设计.docVIP

摘 要 该设计是医药西林瓶锁铝盖机总体及锁盖部件设计，它包括机架组件、上料传动机构、上下机构、模架封口机构、气缸一连杆增力机构和气动系统。 所述的机架组件包括方形机架及其地脚，在方形机架上安装有下支板、中支板和上支板;在下支板和中支板之间对称安装有两个支撑筒，支撑筒内分别安装有拉杆，且拉杆穿过中支板与上支板连接;在两个支撑筒中间，下支板上安装有所述气缸一连杆增力机构;在中支板和上支板之间安装有所述精密模架封口机构;在中支板上面安装着上料传动机构和上料传动机构的侧立板，侧立板的中间部位安装有上下料机构-同步带传动机构;中支板下面安装有液压系统，带动上模做上下运动。主要完成结构设计和电气控制设计。 关键词 医药西林瓶；锁铝盖机；结构设计；电气控制 Abstract This design is the Package machine, automatic Medicine of XiLin, which comprises mountings components, feeding and transmission mechanism, formwork sealing institution, cylinder rods and a pneumatic system. The frame which is described includs its anchor and a square frame.There are three boards are installed in the square frame. Two supporting in which support cylinders are installed separately are installated symmetrically in the next plate and plate , and the rod of tension across the board with a plate connected. Between the two supporting tube plates, the cylinder rod which is dscribed is installated on the under-plate ; precision mold frame sealed institution is installated between the upper plate and in- the-plate;there are feeding transmission mechanism and its lateral made board in the upper plate; in the middle of the lateral plate installation have up-down material institutions - synchronous belt transmission institution; the drive hydraulic system which makes up and down movement with the mould is installed below in the plate. Keywords The bottle of XiLin medicine;Capping machine;Structure design; Electrical control 目录 摘 要 I Abstract II 第1章 绪论 3 1.1 课题研究的目的及意义 3 1.2 国内外研究现状及发展趋势 4 1.3 锁盖机的使用范围 5 1.4 课题的主要设计内容 5 第2章 总体方案的确定 6 2.1 方案的比较及选择 6 2.2 总体布局的确定 13 2.2.1 总体方案的具体内容 13 2.2.2 整机布局 13 2.2.3 医药西林瓶锁盖机的工艺流程 13 2.3 结构方案的确定 15 第3章 总体机动力及传动方案的确定 18 3.1 传动方案的确定 18 3.1.1 驱动方式的选择 18 3.1.2 液压传动 18 3.1.3 同步带传动 19 3.2 主要技术参数的确定 20 3.2.1 电机参数的确定 20 3.2.2 液压缸参数的确定 20 3.2.3 气缸参数的确定 21 第4章 总体机主要部件的确定 22 4.1 液压缸的选择 22 4.2 气缸的选择 22 4.2.1 安装形式的选择 22 4.2.2 选择缸径尺寸 22 4.3 同步带轮的设计计算和校核 24 4.3.