RHEL做RAID5.docVIP

Linux RAID 5实验详解 ? 假设我有4块硬盘,(没有条件的朋友可以用虚拟机设置出4块硬盘出来).分别为/dev/sda /dev/sdb /dev/sdc /dev/sdd.首先做的就是分区了. [root@localhost /]# fdisk /dev/sdaDevice contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabelBuilding a new DOS disklabel. Changes will remain in memory only,until you decide to write them. After that, of course, the previouscontent wont be recoverable.Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)Command (m for help): n #按n创建新分区Command actione extendedp primary partition (1-4) #输入p 选择创建主分区pPartition number (1-4): 1 #输入 1 创建第一个主分区First cylinder (1-130, default 1): #直接回车,选择分区开始柱面这里就从 1 开始Using default value 1Last cylinder or +size or +sizeM or +sizeK (1-102, default 130):Using default value 130Command (m for help): w #然后输入w写盘The partition table has been altered!Calling ioctl() to re-read partition table.Syncing disks. ? 其它分区照这样做全部分出一个区出来.下面是总分区信息: [root@localhost /]# fdisk -lDisk /dev/sda: 1073 MB, 1073741824 bytes255 heads, 63 sectors/track, 130 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytes ?? Device Boot????? Start???????? End????? Blocks?? Id System/dev/sda1?????????????? 1???????? 130???? 1044193+ 83 Linux Disk /dev/sdb: 1073 MB, 1073741824 bytes255 heads, 63 sectors/track, 130 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytes ?? Device Boot????? Start???????? End????? Blocks?? Id System/dev/sdb1?????????????? 1???????? 130???? 1044193+ 83 Linux Disk /dev/sdc: 1073 MB, 1073741824 bytes255 heads, 63 sectors/track, 130 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytes ?? Device Boot????? Start???????? End????? Blocks?? Id System/dev/sdc1?????????????? 1???????? 130???? 1044193+ 83 Linux Disk /dev/sdd: 1073 MB, 1073741824 bytes255 heads, 63 sectors/track, 130 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytes ?? Device Boot????? Start???????? End????? Blocks?? Id System/dev/sdd1?????????????? 1???????? 130???? 1044193+ 83 Linux ? 下一步就是创建RAID了. [