毕业设计（论文）-可编程控制器控制程序的开发.docVIP

南 京 X X 大 学 毕业设计说明书(论文) 作 者： 学 号： 系 部： XXX 专 业： XXX 题 目： 可编程控制器模拟控制程序的开发 指导者： XXX 教授 (姓 名) (专业技术职务) 评阅者： (姓 名) (专业技术职务) 2006 年 5 月 南 京 毕业设计说明书（论文）中文摘要 本文主要分为四篇。第一篇为可编程序控制技术，主要介绍了PLC的基本组成及工作原理，PLC的基本指令系统。第二篇为VB程序设计，主要介绍了VB程序设计基础，文件系统及高级界面设计。第三篇为本文的重中之重为可编程控制器模拟控制程序的开发的程序分析，它是程序开发的基础和精髓，主要涉及PLC指令的读、写和添写功能的分析，解释程序的分析，定时器程序的分析，控制功能的分析，模拟功能的分析，总体界面的设计，这一篇囊括了第一篇及第二篇中的知识。第四篇为可编程序控制器控制程序开发的实例，本篇举了4个例子，为优先电路的演示，小车的往复运动，交通信号灯，电动机的PLC模拟控制实验。 关键词：可编程，程序设计，控制功能，模拟功能 毕业设计说明书（论文）英文摘要 Title: The development of the programmable controller that imitate to control the procedure. Abstract: This text is divided into primarily four article.Article 1 is a programmable preface to control the technique, introduceding the PLC primarily basic to constitute and work the principle, PLC basic instruction system.Article 2 designs for the procedure of VB, introducing the VB procedure design foundation, document system and high class interface design primarily.A development for is heavy textual and heavy inside for programmable controller imitating controling procedure of the procedure analyzes, it is procedure development that foundation that analysis with essence, involve primarily the instruction of PLC read, write with add to write the function, the analysis that explain the procedure, settle machine procedure of analysis, control function of analysis, the analysis that imitate the function, total interface of design, this article bagged article 1 passes two knowledge in the article.A solid a back and forth for, this article raising 4 examples, for having the initiative electric circuit playing showing, small car sport for is programmable preface controller control procedure developping, transportation signal beacon, the PLC of the electric motor imitates the control experiment. Keywords: Programmable, procedure design, contro