毕业设计（论文）-CA6140机床专用夹具设计.docVIP

目 录 摘 要 I Abstract II 第1章 绪 论 1 1.1现代机械工业的生产特点 2 1.2夹具的特点 2 1.2.1 机床夹具在机械加工中的作用 2 1.2.2 机床夹具的工作原理 3 1.2.3 机床夹具的类型 3 1.3机床夹具的组成 5 1.4机床夹具的现状及发展方向 6 1.4.1机床夹具的现状 6 1.4.2现代机床夹具的发展方向 6 1.5本课题的来源及主要研究内容 8 第2章 9 2.1车球窝等分夹具设计步骤与方法 2.1.1车球窝等分夹具设计的基本要求 2.1.2车球窝等分夹具设计的 9 2.1.3车球窝等分夹具设计 9 2.2等分夹具车球窝工艺路线的制定 2.2.1定位基准的选择 10 2.2.2 提高等份夹具车球窝生产率的工艺途径 11 2.3 车床夹具的设计特点 11 2.4 设计夹具应注意的问题 12 第3章 将C620车床改为车球窝机床的工作原理 13 3.1球面凹模的加工图 13 3.2根据此加工工艺设计工装夹具 14 第4章 车球窝等分夹具结构设计几技术要求 16 4.1 车球窝等分夹具结构 16 4.2 夹具体与等分盘的连接 17 4.3 胎座与等分盘的连接 18 4.4被加工工件的定位 19 4.5 偏心距的测量 20 4.6 夹具与机床主轴的连接 21 第5 章 结论 23 5.1结论 5.2 展望 致 谢 25 参考文献 26 摘 要 Tool is a sign of progress in human civilization. Since the 21st century, the modern manufacturing technology and manufacturing process automation machinery have seen significant development. But tools (including fixtures, tools, Tools and assistive device, etc.), not in innovation, its functions are still very significant. Fixture processing machine parts on the quality, productivity and product costs have a direct impact. Therefore, whether in traditional manufacturing or modern manufacturing systems, fixtures and equipment is an important process.  Is a fixture on the workpiece can be certain that the technical requirements of accurate positioning and firmly stepped up the process and equipment; it is widely used mechanical processing, testing and assembly of the entire process.  In the modernization of machinery and equipment manufacturing industry, improve processing accuracy and productivity, lower manufacturing costs, has been by the manufacturers pursuit of the goal. The design and correct and rational use of fixture is to ensure that the processing quality and improve productivity to reduce the cost of one of the important technical aspects, but also to expand the scope of use of all types of machine tools than indispensable.  In this paper, the C620-1 will be transformed into dual-use processing mill cars can be equally dedicated bal