Command Reference Guide for.docVIP

Command Reference Guide for Cisco NetFlow Generation Appliance  This guide provides information about command line interface (CLI) of Cisco NetFlow Generation Appliance (NGA). Cisco NGA is a network appliance that receives network traffic at its 4x10G data ports via SPAN feature of Cisco switches or network tap devices and produces NetFlow records that are transmitted to NetFlow collectors where further processing of the data is performed to achieve specific needs. Cisco NGA may be configured from the device’s graphical user interface (GUI) or the command line interface. This document gives information about the command line interface. Version 1.0May 2, 2012 Contents About This Guide 6 Audience 6 How This Guide is Organized 6 Product Documentation 7 Obtaining Documentation and Submitting a Service Request 7 Command-Line Interface 8 Logging into the Cisco NetFlow Generation Appliance 8 Logging in from a console server 8 Logging in from KVM console 9 Logging in from direct telnet or ssh session 9 Changing the Root Password 10 Resetting the Root Password 10 Getting Help 11 Command and Subcommand 12 CLI Commands 13 audit-trail enable 14 cdp enable 15 cdp hold-time 16 cdp interval 17 clock set 18 config clear 19 config network 20 config upload 22 coredump 23 debug log level 24 exit 25 exsession 26 flow collector 27 flow exporter 29 flow filter 33 flow monitor 38 flow monitor name enable 41 flow record 42 flow sampling rate 46 help 47 ip 48 ip http port 50 ip http secure generate 51 ip http secure install certificate 54 ip http secure port 56 ip http secure server 57 ip http server 59 login banner 61 logout 62 managed-device 63 no 65 nslookup 66 password root 67 password strong-policy 67 patch 69 ping 70 reboot 72 rmwebusers 73 show 75 shutdown 78 snmp 79 terminal 81 time 82 traceroute 84 upgrade 86  About This Guide This guide provides information for using the Cisco NetFlow Generation Appliance command line interface (CLI). Audience This guide is designed for