BCMSN30S06L05 实施WLAN.ppt

Wireless LANs Implementing WLANs Cisco WLAN Implementation Autonomous WLAN solution Autonomous access points Lightweight WLAN solution Lightweight access points WLAN controller Autonomous WLAN Solution Autonomous access point Cisco IOS software Network infratructure PoE switch and router Wireless Domain Services (WDS) Management support Wireless LAN Solution Engine (WLSE) Centralized management Acess Control Server (ACS) RADIUS/TACACS+ security Lightweight WLAN Solution Lightweight access point Network infratructure PoE switch and router Cisco Wireless LAN controller (WLC) Access point configuration Cisco Wireless Control System (WCS) Management Location appliance Location tracking Cisco Secure Acess Control Server (ACS) RADIUS/TACACS+ security Lightweight WLAN Solution Lightweight Access Point Protocol Real-time frame exchange and certain real-time portions of MAC management are accomplished within the access point. Authentication, security management, and mobility are handled by WLAN controllers. Data and control messages are exchanged between the access point and the WLAN controller using LWAPP. Control messages are encrypted. All client data traffic is sent via the WLAN controller. LWAPP Layer 2 mode Layer 2 LWAPP is in an Ethernet frame. The WLAN controller and the access point must be in the same broadcast domain and IP subnet. Layer 3 mode Layer 3 LWAPP is in a UDP/IP frame. The WLAN controller and access point can be in the same or different broadcast domains and IP subnets. The access point must obtain an IP address via DHCP. Association of Access Point to WLAN Controller Access points use LWAPP in Layer 2 and Layer 3 mode to associate to the WLAN controller. In Layer 3 mode, the access point sends an LWAPP discovery request to the controller management IP address via a directed broadcast. The controller responds with a discovery response from the manager IP address that includes the number of access points currently associated to the access point manager