【毕业设计、论文】预应力框架次弯矩浅析.pdfVIP

第29 卷 第4 期 重 庆 建 筑 大学 学 报 Vol. 29 No. 4 2007 年8 月 Journal of C ongqing Jianz u U niversity A ug. 2007 * 黄 音, 陈 曦, 陈明政, 王正霖 ( , 400045) : 预应力框架次弯矩与连续梁相比有着自己的特点探 了预应力框架等效荷载次弯矩与轴次弯 矩产生的机理及其计算方法, 分析了次弯矩对弯矩调幅的影响规律, 提出了考虑次弯矩影响的预应力框 架弯矩调幅设计建议, 该建议采用总量控制的方法, 并考虑了次弯矩的有利作用与不利作用, 可以对预 应力框架调幅设计提供一些参考 : 预应力框架; 等效荷载次弯矩; 轴次弯矩; 弯矩调幅 : T U375 : A : 1006- 7329( 2007) 04- 0066- 04 Discussion on the Secondary Moment of Prestressed Frame HUANG Yin, CHEN Xi, CHEN M ingz eng, WANG Z englin ( College of Civil Engineering, C ongqing University, C ongqing 400045, P. R. C ina) Abstract: T e secondary moment of prestressed concrete frame is different from t at of continuous beam. In t is paper, t e principle and calculation met od of equivalent load secondary moment and axial secondary moment are discussed, and t e infection of secondary moment in moment modulation is analyzed, toget er w it t e sug gestions of moment modulation for prestressed concrete frame w it adopting t e total control. T e suggestions w ould be able to distinguis t e advantageous and disadvantageous effect of secondary moment. Some elpful advises for moment modulation design are given in t is paper . Keywords: prestressed concrete frame; equivalent load secondary moment; axial secondary moment; moment modification [ 1] ( ) , 1 , , , 1 , [ 1]