采矿工程毕业设计（论文）-石台矿1.5Mta新井设计.docVIP

摘 要本设计包括三个部分：一般部分、专题部分和翻译部分。 一般部分为矿t/a新井设计。煤矿位于15公里，闸河煤田中部偏东，坐落在萧县境内。井田走向长约，倾向长约，井田总面积为2。主采煤层为3号煤、，煤层平均总厚为m。井田地质条件较简单井田工业储量为万t，矿井可采储量万t。矿井服务年限为a，涌水量不大，矿井正常涌水量为/h，最大涌水量m3/h。井田为m。大巷采用运煤，辅助运输采用。矿井通风方式为。矿井年工作日为30d，工作制度为“”制。一般部分共包括10章：1.矿区概述及井田地质特征2.井田境界和储量3.矿井工作制度及设计生产能力、服务年限4.井田开拓5.准备方式-区巷道布置6.采煤方法7.井下运输8.矿井提升9.矿井通风与安全技术10.矿井技术经济指标。专题部分题目是。翻译部分主要内容为关于Research and development on cutting scale machine in the coalmine shaft。ABSTRACT This design includes of three parts: the general part, special subject part and translated part. The general part is a new design of ShiTai mine. ShiTai mine lines in Northeast of HuaiBei in AnHui province. The traffic of road and railway is very convenience to the mine. The run of the minefield is 7.5 km ,the width is about 4 km，well farmland total area is ㎞2.The threeis the main coal seam, and its dip angle is 17 degree. The thickness of the mine is about 6m on average. The proved reserves of the minefield are 17619.3 million tons. The recoverable reserves are 12248.96 million tons. The designed productive capacity is 1.5 million tons percent year, and the service life of the mine is 58.4 years. The normal flow of the mine is 329.2 m3 percent hour and the max flow of the mine is 378.6 m3 percent hour. It is a lower gassy mine. The first development level is located at the -280m, and the second and third is of -560m,-850m.The working system “three-eight” is used in the ShiTai mine. It produced 330d/a.There is only one working face in the mine. It is comprehensive mechanized coal face. The length of the face is 160m. Coal is transported by car and the ventilation system is the mixed kind. This design includes ten chapters: 1.An outline of the mine field geology; 2.Boundary and the reserves of mine; 3.The service life and working system of mine; 4.development engineering of coalfield; 5.The layout of panels; 6. The method used in coal mining; 7. Transportation of the underground; 8.The lifting of the mine; 9. The ventilation and the safety