毕业设计（论文）外文翻译-基于超声波检测的倒车雷达设计（硬件设计）1.docVIP

南 昌 工 程 学 院 2007 级毕业（设计）论文 信息工程学院 系（院） 电子信息工程 专业 中英文献翻译 题 目 基于超声波检测的倒车雷达设计（硬件设计） 学 生 姓 名 班 级 2007电子信息工程 学 号 2007100153 指 导 教 师 日 期 2011 年 03 月 21 日 南 昌 工 程 学 院 教 务 处 订 制AT89C2051 Microcontroller Instructions 1.1 Features Compatible with MCS-51 Products 2 Kbytes of Reprogrammable Flash Memory Endurance: 1,000 Write/Erase Cycles 2.7 V to 6 V Operating Range Fully Static Operation: 0 Hz to 24 MHz Two-Level Program Memory Lock 128 x 8-Bit Internal RAM 15 Programmable I/O Lines Two 16-Bit Timer/Counters Six Interrupt Sources Programmable Serial UART Channel Direct LED Drive Outputs On-Chip Analog Comparator Low Power Idle and Power Down Modes 1.2 Description The AT89C2051 is a low-voltage, high-performance CMOS 8-bit microcomputer with 2 Kbytes of Flash programmable and erasable read only memory (PEROM). The device is manufactured using Atmel’s high density nonvolatile memory technology and is compatible with the industry standard MCS-51 instruction set and pinout. By combining a versatile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89C2051 is a powerful microcomputer which provides a highly flexible and cost effective solution to many embedded control applications. The AT89C2051 provides the following standard features: 2 Kbytes of Flash, 128 bytes of RAM, 15 I/O lines, two 16-bit timer/counters, a five vector two-level interrupt architecture, a full duplex serial port, a precision analog comparator, on-chip oscillator and clock circuitry. In addition, the AT89C2051 is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters, serial port and interrupt system to continue functioning. The Power Down Mode saves the RAM