钢筋混凝土梁剪切抗剪强度设计方法的评估.pdfVIP

Technical Note Evaluation of Shear Strength Design Methodologies for Slender Shear-Critical RC Beams Zuanfeng Pan1 and Bing Li2 Abstract: This paper seeks to examine the concrete contribution to shear strength and determine the inclination of the compressive strut within the variable truss model for slender RC shear-critical beams with stirrups. Using the modified compression field theory in place of the conven- tional statistical regression of experimental data, the expression for the concrete contribution to shear strength was derived, and the inclination of compressive struts was determined. A simplified explicit expression for shear strength was then provided, with which shear strength can be calculated without extensive iterative computations. This method was then verified using the available experimental data of 209 RC rectangular beams with stirrups and compared with the current methods from the American Concrete Institute and the Canadian Standards Association. The theoretical results are shown to be consistent with the experimentally observed behavior of shear-critical RC beams. DOI: 10.1061/(ASCE) ST.1943-541X.0000634. © 2013 American Society of Civil Engineers. CE Database subject headings: Shear strength; Struts; Compression; Concrete beams; Design. Author keywords: Shear strength; Concrete contribution to shear; Inclination of strut; Modified compression field theory; Evaluation. Introduction tables. The results of the proposed approach are verified using the experimental data of 209 RC beams with stirrups and compared Although the flexural behavior of RC beams is generally well un- with the results obtained through the methods mentioned in ACI derst