JZ-S-01零件的机械加工工艺规程和铣夹具（有CAD图纸）.pdf

JZ-S-01 JZ-S-01 ABSTRACT The design of special fixture processing procedures of JZ-S-01 parts and process design based on. The main processing surface parts is the plane and hole. In general, guarantee the working accuracy of the plane is easier than to guarantee the machining accuracy. Therefore, the design follows the principle of the surface after the first hole. And the hole and the plane processing clearly divided into rough machining stage and finish machining stage, in order to ensure the machining accuracy. The main process is the first to support the hole positioning processing out of plane, and then the hole processing technology series plane and hole position. In addition to the individual process and top plane positioning technology and other processing of the hole and the plane in the follow-up working procedure. By using the coordinate boring hole. General throughout the process. Fixture fixture, clamping means more choice of manual clamping, clamping reliable, institutions can not lock, therefore the production efficiency is high, su