常州机电-某零件钻3个孔夹具设计说明书（有CAD图纸）.pdf

XX XX XX II Abstract XX parts machining technology and the design of drilling jig design include part machining process design, process design and fixture three. In process design should first of all parts for analysis, to understand part of the process to design blank structure, and choose the good parts machining datum, design the process routes of the parts; then the parts of each step in the process to the size calculation, the key is to determine the craft equipment and the cutting dosage of each working procedure design; then the special fixture, the fixture for the various components of the design, such as the connecting part positioning devices, clamping element, a guide element, fixture and machine tools and other components; positioning error calculated by the analysis of fixture, jig structure the rationality and the deficiency, pay attention to improving and will design in. Key Words:Process, Cutting dosage, Clamping, Positioning II Abstract III IV 1 6 2 7 2.1 7 2.2 7 3 8