锻压机机架机械加工工艺及其夹具设计（有CAD图纸）.pdf

: : : : : 2015 I : II Abstract This paper is the design of mechanical machining process route of forging machine in pattern analysis of forging machine and the design process, in accordance with the requirements of the fixture. The main content of forging machine is processing surface and the hole. The processing route is long, processing time, high processing cost, the machining precision is high. In accordance with the requirements of the machining process, follow the principle of the surface after the first hole, and the hole and the plane processing clearly divided into roughing and finishing stages of processing to ensure accuracy. Reference to the bottom as the benchmark crude, the bottom with two holes as a precision technology base, a variety of process parameters to theprocessing technology and processing were determined.. In parts of fixture design, mainly according to the requirements of machining process, analysis of the degrees of freedom should be restricted, and then according to the characteristics of the selected surface parts of the positioning element, then analysis the selected location of components can be qualified shall be limited degrees of freedom. Determine the positioning components also need to select the clamping element, finally, is to determine the structure of fixture. Key words: forging machine; process; process; special fixture