TK6163-XS数控镗铣床主传动系统设计.docVIP

毕 业 设 计 说 明 书 题目 TK6163-XS数控镗铣床主传动系统设计 摘要关键词： Abstract One of the most fundamental concepts in the area of modern manufacturing technologies is numerical control (NC), and its development is given high attention. It is one of the key factors to ensure NC machine performance by designing a reliable driving and gear mechanism. . At first, on the basis of the demand of overall performance, an infinitely variable transmission with two class gearing is adopted to satisfy the output torque in low speed. According to the design requirements, an AC asynchronous servomotor is used to carry on the stepless transmission and the motor order is decided in response to the rated power and the rated speed. Then the headstocks graduation ratio is computed, the stage number, the speed ratio and the spindle speed range are all determined. The gears and the shafts in the headstock are designed and their stresses are verified. All bearings are selected on various shafts needs. The multi-wedge belt model is selected, and the essential design calculation is carried on. TK6163 NC machine runs well with high performance on account of the infinitely variable transmission’s reasonable design. Key word: AC asynchronous servomotor headstock spindle infinite transmission rolling bearing 目录 前言-----------------------------------------------------------1 第一章 绪论--------------------------------------------------------2 1.1 数控机床的发展----------------------------------------------2 1.1.1 数控机床的发展历史-------------------------------------2 1.1.2 数控机床的特点-----------------------------------------2 1.1.3 数控机床的发展趋势-------------------------------------3 第二章 主传动系统概述-------------------------------------------4 2.1 概述---------------------------------------------------------4 2.1.1 主传动系统特点------------------------------------------4 2.1.2 主传动系统类型------------------------------------------4 2.1.3 主传动系统配置方式--------------------------------------5 第三章 主传动系统结构设计---------