塑料筷笼注塑模具设计与制造.docVIP

摘要 本设计包括模具结构设计的塑料筷笼、相关流程和结构参数分析。我们的主要对象是实现简单,结构紧凑,良好的工艺性能、高精度、长寿命、短周期、高效、低成本。基于需求的塑料制品、模具结构设计设计的依据有:1、大批量生产；2、筷笼零件（实物）；3、国家有关注射模具设计标准(GB8846-88)。 依据筷笼产品要求和塑料件的工艺特点：塑料件表面光洁、外形美观协调、零件壁薄融熔塑料流动距离长且进人型腔后流动阻力大浇口形式。CAD introduction This design includes the mould structure design of dual-use (table/wall) box of chopsticks, related process and structure parameters analysis. Our main objects are to achieve simple and tight structure, good processing property, high-precision, long-life, short-cycle, highly efficient, and low cost. The design is based on: 1.mass production; 2.box of chopsticks (entities); 3.nation standards of injection mould design (GB8846—88). Based on the requirements of the plastic products, mould structure design and injection processing: bright, clean, aesthetic shape, small wall thickness, long runner for the plastics, lager flowing resistance, we select PP as plastic material, use more pin-point gate, two side core. The design consists of two parts: one is the mould design using CAD/CAM, use 3D design software, i.e, Pro/Engineer, mapping entities model and generating two-dimensional drawings, and then obtain drawings of the parts and assembly using AutoCAD; The second is an analysis of the calculation for the mould structure and injection processing, including structural design, the choice of the injection mould machine and the mould carrier, the design of pouring system, mould parts, side plugger mechanism，mould emptier and cooling system . Keywords: Injection mould, More pin-point gate, CAD 目 录 1 引言 1 2 塑件工艺性分析 1 2.1 塑料型号及其性能 1 2.2塑件工艺分析 2 3 注射机选择 3 3.1 塑件的体积估算 3 3.2 注射机类型的选择 3 3.2.1 注射量的确定 3 3.2.2 锁模力的确定 4 3.2.3 注射压力的确定 4 3.2.4 模具闭合厚度的校核 5 3.2.5 开模行程的校核 5 4 塑料模设计 6 11 开模说明 24 12 模具设计CAD 24 12.1 零件UG造型设计 24 12.2零件的PRO/E模具设计 24 13 总结 26 参考文献 27  塑料筷笼注射模具设计 毕业设计说明书 引言 筷笼是日常用品,筷笼是制造业长期以来一直是受欢迎的在注塑行业。为了能在行业,从设计和制造必须开发新的技术和改善其生产方式,以达到利润最大化的目标。 随着人们生活水平的不断提高,筷笼作为生活用品,注塑模具设计和制造方法的创新,不断提高。设计和制造传统的技术已经非常成熟。意义和目的的设计是,传统技术和现代先进制造技术-CAD / CAM、为了缩短设计、生产周期,降低生产