镜座注射模具的设计（有CAD图纸）.pdf

: 2012 9 24 — 2012 12 16 : : : 1 ABS CAD 2 Abstract The plastic injection mould of jingzuo based on practical engineering was designed. In the design the plastic injected and formed with ABS, and there were two cavities in the mould. The technology of manufacture particularly was analyzed. The technology parameter of the plastic, the forming method, forming equipment in the course of using the mould and the collectivity blue print of mould design were confirmed. The collectivity structure of the mould and the particular structure of all the work section were analyzed and resolved. Especially, side-loosing core and constitute cores structure, conducts some necessary dimension calculate and intension inspect were adopted. The irrigate systemshuck institution and temperature adjust system were also designed. The triaxiality models and the schedule drawings of the mould were done. All the work of the mould design was finished in the end. Through this design, the knowledge of more basic and specialty was synthetically applied. The system of knowledge we learned was intensified. The methods