基于LabVIEW的纯实时仿真方法及应用.pdfVIP

2007年11月 控 制 工 程 Nov . 2 0 0 7 第14 卷第6期 Control Engineering of China Vol. 14, No. 6 :2007) LabVIEW 孙 娜, 俞 梅, 袁爱进 ( , 116028) : 针对Matlab 仿真不能解决实时性的问题, 提 了一种将纯Matlab 仿真向纯实时仿 真的转换方法结合一种基于频率特性的 PID 控制器参数自整定算法的研究, 先用Matlab 与 LabVIEW 混合编程仿真来验证LabVIEW 程序的可行性; 再通过OPC 服务器作为中间桥梁实现 智能仪表与LabVIEW 之间的数据通信, 从而使整 个程序全部由LabVIEW 和智能仪表的实时运 算来实现带延迟的一阶惯性环节为被控对象的闭环仿真与大连交通大学自主开发的嵌入式 软件构件集成开发平台验证了该方法的有效性 : LabVIEW; 实时; 频率特性; Matlab; OPC : TP 273 : A LabVIEW Based Realtime Simulation Method and Its Applications S UN Na , YU Mei, YUAN A ij in ( College of Electricity and Information, Dalian Jiaotong University, Dalian 116028, China) Abstract: To the problem of realtime in Matlab, a realtime simulation method replaceing Matlab is presented. Combinaing with a PID con troller parameter selftuning algorithm research based on frequency characteristic, LabVIEW and Matlab simulation programs are mixed to test the feasibility of LabVIEW. Then the data communication between the smart meters and LabVIEW is made through OPC server as a bridge. The whole process is controlled realtimely by LabVIEW and the smart meters. The effectiveness of the method is shown by both the simulation of loop control system with first order inertia tache as controlled object and the development platform of embedded software component selfdevel oped by Dalian Jiaotong University. Key words: LabVIEW; realtime; frequency characteristic; Matlab; OPC Matlab+ LabVIEW+ LabVIEW 1 , LabVIEW NI ,