毕业论文_格式范文【荐】.docVIP

教学部网站下载封面，所有格式以绿皮书为准 毕业设计报告(论文) 题目: 基于单片机的 数字时钟的原理与制作 二号宋体（粗体）居中 题目较短的用一行 删第二行线 所属系 电子工程系 专 业 电子信息工程 学 号 xxxxxx 姓　　名 xxxxxx 指导教师 xxxxxx 起讫日期 设计地点 无页脚 基于单片机的数字时钟的原理与制作 摘 要 小三号宋体（粗体）居中 单片机在数字钟中的应用已是非常普遍的，由单片机作为数字钟的核心控制器，可以通过它的时钟信号实现计时功能，将其时间数据经单片机输出，利用显示出来。通过键盘可以进行校时、定时等功能。输出设备显示器可以用液晶显示技术和数码管显示技术。 利用单片机实现具有计时、校时等功能的数字时钟，是以单片机为核心元件同时采用LD数码管显示器动态显示“时”，“分”，“秒”的现代计时装置。了单片机LED数码显示器的内部结构设计及调试过程LED数码管显示器Principle and production of digital clock based on Single Chip Microcomputer Abstract Single Chip Microcomputer is already very common in the application of digital clock, as the core controller of a digital clock, SCM can achieve the function of timing via its clock signal. And its time data can be exported via SCM and displayed by the monitor. Keyboard can achieve the function of timing and clocking, to name just a few. The Liquid-crystal display technology and Digitron display technology can be applied in the output device monitor. This design is utilizing the SCM to produce the digital clock with the functions of clocking, timing, announcing the time on the hour and so on. It is a modern timing device, among which the SCM AT89C51 is the core element. Meanwhile, LED digitron monitor dynamically display the “hour”“minute”“second”. This dissertation elaborates the interior structure, system hardware circuit and the process of software program＇s design and debug of SCM and LED digitron monitor in detail. Meanwhile, schematic diagram and flow chart are also provided.It contains the basic process of requirement analysis ,system design,SCM programming , schematic diagram, PCB chart and final welding of the board which forms a complete procedure for product manufacture. Keywords: Single Chip Microcomputer AT89C51；digital clock；LED digitron monitor Word排版技巧，自动生成目录 目 录 摘 要 I Abstract II 第一章 引 言 1 第二章 单片机简介 2 2.1 单片