最新耦合器测试报告.docVIP

TEST REPORT IEC 60 320-1 and/or EN 60 320-1 Appliance couplers for household and similar general purposes Part?1: General requirements Report reference No. : Report No. Tested by (printed name and signature) : Approved by (printed name and signature) : Date of issue : Testing Laboratory Name : Address : Testing location/procedure : CBTL SMT TMP Address : Applicant’s Name : Address :  Test specification Standard : IEC 60 320-1:2001 and/or EN 60 320-1:2001 Test procedure : CB and/or CCA Scheme Non-standard test method : Test Report Form No. : IECEN60320_1D TRF originator . : IMQ Master TRF : Dated 02-02 Copyright ? 2002 IEC System for Conformity Testing and Certification of Electrical Equipment(IECEE), Geneva, Switzerland. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the readers interpretation of the reproduced material due to its placement and context. Test item description : Trademark : Manufacturer : Model and/or type reference : Rating(s) : Copy of marking plate Summary of testing Test item particulars: Connector : Yes / No ... which is : rewirable / non-rewirable Appliance inlet : Yes / No ... which is : integrated / incorporated For : cold conditions / hot conditions / very hot conditions For : Class?I equipment / Class?II equipment Earthing contact : with / without Type of terminal : pillar / screw / stud / screwless Type of cord : Cross-sectional areas (mm2) : Voltage (V) : Current (A) : Standard Sheet : C Possible test case verdicts: Test case does not apply to the test object : N/A Test item does meet the requirement : Pass (P) Test item does not meet the requirement : Fail (F) Testing Date