角色与安全职责.pdfVIP

Safety Roles and Accountabilities 角色与安全责任 SSP 23 Safety Roles and Accountabilities 角色与安全责任 NTCC-SSP-23 Page 1of 7 INDEX 目录 1 INTRODUCTION 引言 2 AIM 目标 3 PROCEDURE 程序 2 1. INTRODUCTION 引言 Individual work techniques used by employees calls for a safe system of work to be provided. 需要为雇员的工作提供一个安全的工作体系。 2. AIM 目的 The aim of this procedure is to make managers and staff aware of their duties and responsibilities 本程序的目的是使经理和雇员明确其职责和责任。 3. PROCEDURE 程序 RESPONSIBILITIES 责任 3.1 Employees 雇员 a) Comply with safe operating procedures 遵守安全操作程序 b) Report hazards or potential hazards to Supervisors 向管理人员报告危险或潜在的危险 c) Report accidents/incidents to prevent recurrence 报告突发事件/事故以防止发生重复事故 d) Assess the safety of new experimental procedures, seeks advice as needed, and makes recommendations for developing safe procedures 评估新的实验程序的安全性，按照需要征求建议，并为开发的安全程序提出建议 e) Assume responsibility for the safety of visitors to the work area 对作业区的来访者的安全承担责任 f) If the job is thought to be unsafe, stops the work and reviews plan for practice 如果认为从事的工作不安全，停止工作并审查实施计划 g) Participate in suggestion system to correct unsafe conditions 参加建议体系，纠正不安全状况 h) Look after fellow workers 照顾工友 I) become familiar with the safety rules and regulations and follows them at all times 熟悉安全法规和制度并始终遵守 j) Ensure that personal safety equipment is in good repair and used as required 确保个人安全设备维修良好，并按要求使用 k) Participate actively and constructively in safety meetings/ inspections 积极主动参加安全会议和安全检查 l) Think before acting 三思而行 3.2 Contractor Supervisory Personne