A-new-multi-objective-approach-to-finite-element-model-updating.pdf

Journal of Sound and Vibration 333 (2014) 2323 –2338 Contents lists available at ScienceDirect Journal of Sound and Vibration journal homepage: /locate/jsvi A new multi-objective approach to finite element model updating Seung-Seop Jin a, Soojin Cho b,n, Hyung-Jo Jung a, Jong-Jae Lee c, Chung-Bang Yun b a Department of Civil and Environmental Engineering, KAIST (Korea Advanced Institute of Science and Technology), Daejeon 305-701, Republic of Korea b School of Urban and Environmental Engineering, UNIST (Ulsan National Institute of Science and Technology), Ulsan 689-798, Republic of Korea c Department of Civil and Environmental Engineering, Sejong University, Seoul 143-747, Republic of Korea a r t i c l e i n f o a b s t r a c t Article history: The single objective function (SOF) has been employed for the optimization process in the Received 22 May 2013 conventional finite element (FE) model updating. The SOF balances the residual of multiple Received in revised form properties (e.g., modal properties) using weighting factors, but the weighting factors are hard to 19 December 2013 determine before the run of model updating. Therefore, the trial-and-error strategy is taken to Accepted 22 January 2014 find the most preferred model among alternative updated models resulted from varying Handling Editor: M.P. Cartmell Available online 16 February 2014 weighting factors. In this study, a new approach to the FE model updating using