弱电学习.ppt

Chapter 2 (Part B) Technology of Electrical Control in Factory PART B Technology of Electrical Control in Factory Low-voltage electric apparatus ②material：Copper (Cu) generally；Argentine (Ag) to low capacity apparatus. 1) Power switch 1) Power switch a. knife switch without fuse b. knife switch with fuse c. automatic air switch (low-voltage circuit breaker) 2) Fuse 2) Fuse 3) Master electric apparatus 3) Master Master electric apparatus 3) Master Master electric apparatus 3) Master Master electric apparatus 3) Master Master electric apparatus 2. Manual electric apparatus push-button See the air switch. swf symbol normally open contact: normally closed contact: SB SB 2. Manual electric apparatus See the travel switch. swf limit switch See the position switch. swf proximity switch travel switch limit switch 2. Manual electric apparatus symbol limit switch normally open contact: normally closed contact: Linked contact: ST ST ST 2. Manual electric apparatus AD transformer function: to increase , decrease or distribute the voltage symbol ~380V ~220V (127V) T (or TC) ~380V T (or TC) ~6V(6.3V) ~36V(24V,12V) ~380V T (or TC) ~127V ~36V a b c structure a. Contacts system normal open contacts normal closed contacts b. Magnetic system c. Arc control device 3. Automatic electric apparatus ①AC contactor See the AC contactor. swf Main contacts Auxiliary closed contacts Auxiliary open contacts Immobile core Mobile core Electric winding Arc control device structure ①AC contactor The structure of AC contactor core KM KM auxiliary contacts KM symbol main contacts KM KM ①AC contactor 3. Automatic electric apparatus ②Time relay structure a. Contacts system b. Magnetic system c. Other device types a. Switch on relay b. Switch off relay See the switch on relay. swf See the switch off relay. swf * * * * * Section1 Low-voltage electric