GSM核心网络优化-SNPI.ppt

CH_8 C7 signaling measurement Procedure of analyzing signaling network MSC/VLR HLR EIR PLMN GMSC GIWU OM STS Definitin 7CONVERT SPOS/TURTLE ANALYSIS REPORT MTP COUNTER DATA COLLECTION POST-PROCESSING CH_8 C7 signaling measurement Procedure of analyzing signaling network DATA is collected by STS or OM measurement function STS object types: -C7SL1 -C7SL2 -C7SLSET MTP level 1、2、3 on signaling link set Data for signaling performance、link/link set availability utilization CH_8 C7 signaling measurement Procedure of analyzing signaling network OM measurements on 1、signaling sets 2、signaling links 3、destinations Presenting data on the 1、performance 2、availability 3、configuration CH_8 C7 signaling measurement Procedure of analyzing signaling network－STS LS failures Duration of LS unavailability:object C7SLSET STUNADURAT link set unavailability duration 9（秒） 链路组性能： CH_8 C7 signaling measurement Procedure of analyzing signaling network－STS object type C7SL1 NSUERR 收到错误的MSU数 C7_SLUR_E＝（NSUERR/NMSURE)*100 NNAREC 负确认数（对端没有确认的MSU） NNAREC number of negative acknowledgements received CHOVERS 链路翻转数 CHOVERS local automatic changeovers 链路性能： CH_8 C7 signaling measurement Procedure of analyzing signaling network－STS Duration of SL unavailability : object type C7SL1 LBUSDUR local busy status(100 ms) UNAVAILDUR SL unavailability duration (s) LOCINHDUR local SL inhibition duration (s) REMINHDUR remote SL inhibition duration (s) UNAVSLFDUR link failure UNAVRBLDUR remote processor outage(s) 链路可用性： CH_8 C7 signaling measurement Procedure of analyzing signaling network－STS Duration of SL unavailability : object type C7SL1 Percentage SL unavailability duration : C7_SLUD_T=(UNAVAILDUR/(PERLEN*60))*100 Percentage local SL inhibition duration : C7_SLUD_L=(LOCINHDUR/(PERLEN*60))*100 Percentage remote SL inhibition duration : C7_SLUD_R=(REMINHDUR/(PERLEN*60))*100 链路可用性： CH_8 C7 signaling measurement Procedure of analyzing signaling netwo