具有以太网接口的变电站监控系统设计.pdfVIP

控制系统 文章编号：1008-0570 （2006 ）00-0-0000-00 具有以太网接口的变电站监控系统设计 Design of Transformer Substation Monitoring System with Ethernet Interface （哈尔滨工业大学（威海））曲延滨 张扬 Qu,Yanbin Zhang,Yang 摘要：本文介绍了具有工业以太网接口的变电站监控系统的设计与实现。提出了双CPU结构的变电站监控 系统，数字信号处理器TMS320VC5402作为主CPU，用于以太网接口的控制管理，以及定时向上位计算机 发送数据，同时读取下位数字信号处理器采集的数据。数字信号处理器TMS320LF2407A作为从CPU，用于 键盘、显示的控制，开关量、脉冲量、电网频率、模拟量等数据的采集以及模拟量和继电器的输出控制。 系统软件支持MAC, TCP/IP 等协议规范，从而实现了监控系统的网络化。给出了数字信号处理器 TMS320VC5402与以太网控制器RTL8019AS 的硬件设计及嵌入式TCP/IP协议的汇编程序设计。 关键字：以太网；监控系统；数字信号处理器（DSP ） 中图分类号：TM764.1 ；TP393.1 文献标识码：B Abstract: This paper introduces the design and realization of transformer substation monitoring system with industrial Ethernet interface. A new type of transformer substation monitoring system structure with double CPU is proposed. In this system, the digital signal processor (DSP) TMS320VC5402, as the master CPU, is used to control and manage the Ethernet interface. At the same time, it reads data gathered by the lower DSP and transmits those data to the host computer in a certain time. DSP TMS320LF2407A acts as the slave CPU which carries out following tasks: processing keyboard input information, controlling data display, gathering various data such as digital variables, pulse variables, power grid frequency and analog variables, and controlling the output of analog variables and relay. The system software supports MAC and TCP/IP protocols, so that the cyberization of monitoring system comes true. In addition, the hardware design between DSP TMS320VC5402 and Ethernet controller RTL8019AS and the software design of embedded TCP/IP is given in this paper. Keyword: Ethernet; monitoring system; digital signal processor (DSP) 1 引言 随着计算机、通信、网络等信息技术的发展，信息交换的领域已经覆盖了工厂、企业乃 至世界各地的市场，建立以工业控制网络技术为基础的企业信息化系统已是